7 Fix For Jeep Wrangler Passenger Seat Won’t Fold Forward!
Like most vehicles, the jeep wrangler’s passenger seat also folds forward. However, Jeep Wrangler has received criticism for various issues while being the most well-liked and often used SUV. One of these is that the passenger seat does not fold forward.
By fixing the latch cable, you can easily solve the jeep wrangler passenger seat won’t fold forward problem. But this is not the only possible solution. There are some other solutions which will also help you to overcome this situation.
In this article, we’ll go through all the potential root causes of this issue and how to fix them if you run across them. Therefore, read on for more information.
Why Won’t The Passenger Seat On A Jeep Wrangler Fold Forward?
Passenger seat folding forward features is one of the most effective features in any vehicle, like the jeep wrangler. However, after a certain number of usage, folding issues start to appear, and your Jeep Wrangler may also have this problem.
There are several reasons for this problem, and if you have a clear idea of the main cause that prevents your seat from folding forward, you will be able to easily solve this issue.
These are the several possible causes of this problem.
- Faulty Cable
- Displaced Cable
- Damaged Latch Strap
- Jammed Latch & Operating Arm
- Broken Latch System
- Broken Arm Under The Seats
- Lever Problem.
Read Also: Jeep Wrangler Ignition Switch Problems: Easiest Way To Solve
7 Easy Fix For Jeep Wrangler Passenger Seat Won’t Fold Forward
From the previously mentioned points, you already have a basic grasp of the possible causes of your Jeep Wrangler’s passenger seat’s failure to fold forward. However, sometimes, you will face these problems when you are not in a position to fix this issue with an expert technician. In those situations, you have to fix these on your own.
This section will discuss these problems, when they occur, possible costs to fix them, and comprehensive solutions.
#1- Examine And Fix The Faulty Cable
You are likely aware of the cable connection between the latch and the control system underneath the seat. This cable may tear for several reasons.
When this cable tears, the connection fails between the controller under the seat and the latch. In this situation, if you try to fold the seats forward, you won’t be able to do it.
This problem can be easily fixed by replacing this cable. This replacement cable will cost you around $15 to $20; if you change it by yourself, it will be an inexpensive repair.
To solve this issue, you can follow these procedures:
- Step 1: First, detach the latch from the passenger seat.
- Step 2: Remove the cable from the latch connector and seat underneath the controlling arm.
- Step 3: Install a new cable and connect them properly. Finally, set the latch to its own place.
#2- Fix The Displaced Cable Issue
When you use your jeep wrangler too often off-road, the latch cable can be displaced from its own place. Once it’s displaced, it can not work properly and prevents you from folding the seat forward.
If you find that the cable is displaced, you can easily set it in its own place. If you have proper knowledge of how it works and where it should be connected, you can easily fix this issue without spending any money.
Read Also: How To Turn Off Jeep Lights When Doors Are Open? [Fixed]
#3- Replace The Damaged Latch Strap
When you pull the latch, which is connected to a controller underneath the seats by a cable, it helps your seat to fold forward. After continuous use, this strap may tear apart. When this strap tears, users can not use the latch to fold the seats.
But, you can easily fix this problem by changing the damaged latch strap. It’s an inexpensive repair that will cost you almost $20 to $30. Besides, if you want to use your DIY strap, it is possible to accomplish it without paying any money.
#4- Clean Jammed Latch & Operating Arm
This folding mechanism can become clogged one day if you don’t use your jeep or folding function for a while. This issue might also be caused by damaged components, dust, or other pollutants.
If you have this issue, you must thoroughly inspect and lubricate it. If the issue is still present, this suggests that internal pieces may be broken. In this case, attempt to unlock the latch and operating arm from underneath the seats and look for any damaged components.
If you discover that it is jammed, you may clean it for free. However, you will need to pay money to repair any broken components if you discover them.
#5- Replace Broken Latch
A latch is the primary component of the Jeep Wrangler seat folding mechanism, as we previously described. The majority of the time, this is constructed of plastic, which is quickly broken by frequent usage and rough handling.
So, when you notice that the passenger seat’s latch has been broken, you have to replace it. A replacement new latch will cost you between $5 to $10, and you can replace it yourself.
Here are some step-by-step procedures, which will help you to complete this replacement process.
- Step 1: Hardly pull the latch upward until it fully comes out.
- Step 2: Carefully detach the cable from it and hold the cable with one hand.
- Step 3: With your other hand, take the new latch, connect the cable with it tightly and push the latch down until it’s locked firmly.
#6- Replace Broken Arm Under The Seats
The folding and moving forward mechanism depends heavily on an arm that is situated under the passenger seat. When the latch is pulled up, a cable enables you to fold the seat forward. Once the seat is folded forward, a second cable underneath the seat connects to an arm which enables the seat to move forward.
By regular use, these cables become loose and don’t work properly. To solve this problem, you have to take it to an expert mechanic. This repair can be costly according to the problems. This will cost you around $100 to $150.
#7- Fix The Lever Problem.
The lever that assists in the seat folding forward is mostly engaged when you raise the latch. For a variety of reasons, the cable that ensures appropriate operation might occasionally break.
Reattaching the connectors is an easy way to solve this issue. All you have to do is rejoin the cable by opening the lever connector. You could discover that the cable hook has torn off. You need to replace the entire cable in this case.
Additionally, you can just join the cable with the lever using some glue and a zip tie. This is only a short-term fix, and you don’t have to spend any money.
Read Also: Jeep Wrangler Back Door Won’t Lock or Latch – What To Do?
FAQs
You might have some questions after reading this article. We made an effort to respond to the most frequently asked questions in this part. To find the answer you’re searching for, read this FAQ.
How long does a folding system last in a Jeep Wrangler passenger seat?
Is it hard to repair a faulty folding system of a Jeep Wrangler passenger seat?
Is it safe to drive a Jeep Wrangler with passenger seat folding problems?
How long does it take a mechanic to repair a Jeep Wrangler passenger seat folding issue?
Read Also: Jeep Wrangler Rust Proofing Guide – [Ways to Save Your SUV]
Conclusion
The condition of the vehicle’s seat position has a significant impact on your safety. Because of this, you should always seek professional help when you run across issues. But eventually, these problems are simple to resolve on your own.
However, if you pick professional help, you can relax and ensure that your car is in capable hands.
In conclusion, always try your best to maintain the important parts of your jeep, especially the passenger seat. Even though they are not particularly crucial, they can sometimes save lives. You will also encounter a number of serious issues if their folding system fails.
