9 Most Common Jeep 2.0 Turbo Problems (Solutions Included)
While dominating the Jeep engine market with top-notch performance! As per user complaints, the Jeep 2.0 has some turbo issues. Among them, the most common include oil leaks, horsepower issues, and turbo lags. Besides, its external problem is its high maintenance cost.
Fortunately, they are solvable, and regular maintenance can prevent most of the problems. If you fail to do so, these minor issues can lead to replacement services and damages. Let’s explore some best courses of action and the reasons in detail.
Quick Fixing Chart for Jeep 2.0 Turbo Problems
You don’t need to rush to an automotive servicing center to fix the glitches initially.
In fact, a quick inspection, cleaning some debris, or replacing fluids and parts come in handy to troubleshoot most technical issues. Here is a quick fixing chart for better clarity:
| Common Problem | Quick Fix |
| Less horsepower | Replace the engine |
| High maintenance | Inspect the jeep after each ride |
| Oil leaks | Change oil frequently |
| Recalls | Contact the manufacturer |
| Power loss | Keep fuel pressure 50 psi |
| Turbo lag | Install a throttle |
| Engine Lights on | Replace faulty sensors |
| Overheating | Flush the cooling system |
Troubleshooting and Fixing Jeep 2.0 Turbo Problems:
Previous owners that have driven their Jeeps with a Jeep 2.0 turbo engine have reported some issues with it.
These problems are more or less similar, regardless of the Jeep models. So let us disclose them all, including their quick fixes:
1. Horsepower Performance Issue
With this engine, you can’t drive off roads or climb hilly roads and mountains smoothly.
Because the 270 horsepower and low torque sometimes fail to supply enough power to pull the Jeep up the sloppy roads.
Also, the low power results in low towing capacity. Meaning, you can only lift up to 3,500 pounds!
There is no fixed solution to increasing the Jeep 2.0 turbo horsepower. However, if you don’t want to replace it, install a transmission or exhaust system.
2. Costly Maintenance
To keep the turbo 2 engine healthy, it requires frequent oil and transmission fluid changes.
You can drive without issue for 1000 miles, but you can no longer drive ahead if you don’t add oil!
Besides, the fluids required for 91 octane are expensive. Moreover, replacing the spark plugs every 30,000 miles and maintaining the battery are costlier.
And without regular oil changes and maintenance, the engine won’t function properly or may wear out sooner.
Frankly speaking, it isn’t possible to lower the maintenance cost. Or else it will affect the engine’s performance.
But you can definitely save the repair cost if you inspect the jeep and engine after every ride.
This way, it allows you to remove any debris from the vehicle so that it can’t clog the internal system and damage the engine. And ensure the sparks don’t have any dents.
Read Also: Jeep 3.8 Engine Problems: All Possible Causes
3. Oil Leakage
Engine oil tends to leak from the turbo engine, especially if the oil cooler is faulty.
Also, when the oil pan gasket gets worn, fluids will start dripping the damaged holes and surface.
And without the cooler functioning correctly, the oil temperature rises or decreases.
Follow the manufacturer’s manual to change the oil frequently and in the quantity recommended by them. Avoid pouring excessive liquid to prevent such leakages.
Always keep the gasket and seals clean so that rust can’t build up and damage the pan. If nothing fixes the leaks or tears, contact an authorized mechanic right away for a replacement.
Read Also: What Causes Jeep Liberty Valve Noise? – Know Specific Fixes
4. Several Recalls Issue
The National Highway Traffic Safety Administration (NHTSA) has recalled the Jeep 2.00 turbo engine several times.
Because sometimes, the overheated engine causes the steering column to malfunction.
And with a faulty column, drivers won’t be able to turn the steering wheel as per the input.
Also, broken oil sensors lead to oil leakage. Therefore, the NHTSA has again issued a recall or marked the engine for not maintaining automotive standards.
In 2020, it came under another recall because it had defective fuel lines. Those lines were loose, and the materials cracked easily! All these internal issues can lead to fatal damage.
If you ever receive a recalling email, contact the engine manufacturer or professional service center.
They can tell you what to do and confirm whether the emails are only precautionary notifications.
In most cases, if you inspect the car and find faulty fuel lines and pressure sensors, replace them immediately.
Read Also: How To Fix Jeep Wrangler Hazard Lights Won’t Turn Off Issue?
5. Power Loss
Sometimes, this Jeep 2.0 turbo engine doesn’t function at maximum power, especially when you try to run it for a longer period.
It happens as the turbocharger, intercooler, and fuel injection system have limitations in holding air and pressure.
Once you pump the maximum amount of air and pressure into them, the engine will gradually lose power.
In order to resolve it, always try to keep the fuel pressure at least 50 psi. If there is a disruption in the pressure, replace the fuel pump.
Also, with a dry, soft brush remove the dirt and debris from the cylinders and system.
It prevents rust build-up and misfiring while running the engine at full power.
6. Turbo Lag
Turbo lag refers to the mismatched response of the engine to the input. If you want to accelerate and speed up, the engine may produce maximum power for a short amount of time.
Then, shortly after, it’ll start lagging, which causes stalling and engine damage. It tends to drag the Jeep, and we guess it’ll be a ride of discomfort for you and the passengers!
But fortunately, you can install a throttle to boost up the air intake so that the engine can supply more power when required. Keep the tire pressure at the level recommended in the owner’s manual.
Most importantly, there shouldn’t be any leaks in the oil pan or external body of the car to prevent pressure drop.
Read Also: Why Jeep Wrangler 4 Wheel Drive Not Engaging? (Fix Now)
7. Malfunctioning Injector and Sensor
As you know, faulty fuel injectors reduce fuel efficiency. So, you will need to add fuel earlier than expected, which may hurt your wallet!
When carbon develops on the injectors, they malfunction mainly and lead to rough idle.
Also, the engine has several sensors that can be faulty and wear out over time. Such malfunctioning sensors cause poor performance and power loss while driving.
Sometimes, driving the Jeep at a constant speed for a few minutes helps realign the sensors with the specifications.
If it doesn’t resolve the issue, visit an automotive service center to figure out which sensor is causing the trouble. Try to get it replaced immediately without opting for a cheaper substitute.
8. Engine Lights Stay On
Have you noticed constantly flickering engine lights that stay on? Well, it can distract you when you drive.
Because you will wonder what is causing it to blink, even though the engine is all okay!
Furthermore, you won’t understand whether they are on due to engine issues or sensor issues. This prevents you from making the correct decision while driving.
Due to a loss of power or loss of connection, the lights are prone to act up. So, using a wrench, we’d suggest securing them properly.
Afterward, replace the blown-out fuse, a faulty sensor, and the battery to supply proper power to the light sensor.
In this way, it’ll confirm they don’t send false readings to the lights to prevent constant flashing.
Read Also: Why Jeep Wrangler Sun Visor Won’t Stay Up? (Easy Solutions)
9. Overheating
The engine units tend to overheat from time to time. And that mostly happens if you haven’t changed the liquid for quite a long!
As a result, the oil drips off and the heat seals the motor. And note that it can be costly to maintain such an engine.
Why? This is because you’ll constantly need to change the oil. And this will prevent you from driving constantly, as you will need to turn the engine off every now and then to cool it down.
You can simply get rid of it if you replace the faulty engine compartments, which have dents, tears, and overheating tendencies.
We’d say flushing the cooling system also keeps the engine temperature moderate.
Final Words
Just because you’re dealing with the Jeep 2.0 turbo problems doesn’t mean that you will need to miss out on its great functions! All I recommend is to inspect the external and internal systems of the Jeep.
Find out if there is any leak, loose connections, faulty sensors, and overheating engine compartments. Keeping these units functioning and cleaning reduces most of the issues!
Read Also: How To Fix Jeep Wrangler Key Fob Not Detected Issue? Solved
