Bolt Pattern of the Jeep Grand Cherokee | All Models Guide

What if you may buy a new wheel but it doesn’t fit your car because of the wrong bolt pattern? So, if you have a Jeep Grand Cherokee and you need to replace the wheel, be sure of the bolt pattern.

You can check your user manual for the right bolt pattern or even measure it yourself. Anyway, we’re going to answer your question: What is the bolt pattern Of Grand Cherokee and how to measure it yourself? Keep Reading!

Bolt Pattern of All Jeep Grand Cherokee Models

The bolt pattern, also known as the lug pattern, is the number of lugs or holes in the middle of the wheel and the distance between each hole.

It consists of two numbers: the first digit refers to the number of bolts, while the second digit or digits represents the diameter of the bolt circle. 

The bolt patterns can be varied by the car’s model and years. However , the bolt pattern on Jeep Grand Cherokee has remained the same since 1999 to the present. 

Over these years, the Jeep Grand Cherokee bolt pattern has had a bolt pattern of 5×127 mm or 5×5 inches, which means the vehicles have five bolts and the pitch circle diameter (PCD) is of 127 mm or 5 inches. 

However, you should also be aware of the thread size and stock wheel offset before when you go shopping for wheels for your Jeep Grand Cherokee:  

Grand Cherokee Years Thread Size Stock Wheel Offset 
2011-2014M14 × 2.0025 – 45 mm
2015M14 × 2.0025 – 45 mm
2016-2020M14 × 2.0044 – 53 mm
2021-2022M14 × 2.00___
2010M14 × 2.0025 – 45 mm
2004-2009½-20 UNF30 – 45 mm
1999-2003½-20 UNF18 – 45 mm

Read Also: How to Reset Jeep Grand Cherokee Oil: 2 Must-Try Methods!

How to Measure the Jeep Grand Cherokee’s Bolt Pattern?

Measuring the bolt pattern of your Grand Cherokee involves two steps: counting total number of bolts and knowing the diameter. 

First off, count the number of bolts on the wheel, and then measure the pitch circle diameter. The pitch circle diameter is the diameter of the imaginary circle determined by the distance between the centers of the two bolts. It can be expressed in millimeters or sometimes in inches as well. 

Below we’ll discuss the possible ways to measure the bolt pattern on a Grand Cherokee using a bolt pattern gauge or a 12-inches ruler. So, here’s we go:

For 4-lug, 6-lug, and 8-lug bolt pattern

This is the easiest way to estimate the PCD for a 4-lug, 6-lug or 8-lug bolt pattern. Simply, measure from the center of one bolt to the center of the directly opposed bolt. 

For 5-lug bolt pattern 

The pitch circle diameter of five lugs is pretty difficult to measure as the bolts are not positioned directly across from each other. But it can be done in two ways: 

  1. Measure from the back of one lug hole to the center of the second lug hole. 
  1. Or, measure from the center of one hole to the center of the third hole. 

Once you know the number of lugs and have measured the PCD (pitch circle diameter), just put them together to get the bolt pattern for your Grand Cherokee.

Read Also: How To Remove Roof Rack Cross Bars Jeep Grand Cherokee

Why is the Jeep Grand Cherokee’s Bolt Pattern Important?

Knowing the exact bolt pattern of your vehicle is one of the most important things you should consider before shopping for a new wheel. 

The right bolt pattern or lug pattern ensures your safety and a proper fitment of the tire on a wheel. 

It is also very important to prevent any kind of installation issue. Because these bolts are used to hold the rim which usually holds the tire on the wheel. 

If the bolt pattern doesn’t match with the rim, it won’t fit the wheel properly and it will be risky to handle.

Read Also: Jeep Grand Cherokee Diesel 3.0 CRD Problems & Reliability? (Explained)

What is a Dual Drill Bolt Pattern?

In addition, there is also another type of bolt pattern that is called dual drill bolt pattern. The dual drill bolt pattern is the bolt pattern where there are two different bolt patterns in a single wheel. 

This is because the dual drill wheels have two different sets of lug holes that determine two different bolt patterns.

A 4×156/137 dual drill bolt pattern means that there are a total of eight lug holes and the pitch diameters are estimated 156 mm and 137 mm.

Read Also: Jeep Grand Cherokee Sport Mode: For Tasty Riding

Frequently Asked Questions

Here we have added five common FAQs about the bolt pattern: that of course clears your doubt further.

Is the 5×5 bolt pattern the same as 5×127?

Yes, the 5 × 5 bolt pattern is the same as 5 × 127. The 5 × 5 lug pattern is the Metric (measurement) variation, while 5 × 127 is measured in US standard or inches.

Why is the 5×5 bolt pattern the best?

The Jeep Grand Cherokee 5 × 5 bolt pattern is the best as it is the most stable bolt pattern. It’s because, if there is a missing lug or one lug becomes loose, it will still match the 4-lug bolt pattern and hold the tire onto the wheel properly. 

Is the 4×4 bolt pattern better than 5×5?

Not exactly. Both of these bolt patterns are good in different ways. For example, the unsprung weight on a 4-lug pattern is lighter than a 5-lug pattern. On the other hand, a 5×5 bolt pattern is more stable than a 4×4 bolt pattern. 

What is the size of the Jeep Grand Cherokee’s rims?

The rim size on Jeep Grand Cherokee comes in 16 inches, 18 inches, and 20 inches depending on the make and model of the car. So, check your year, make and model online or search in the owner’s manual. 

Are Jeep Grand Cherokee and Ford F-150 wheels interchangeable?

No! Unfortunately, they are not interchangeable. Because their bolt patterns are not the same. Jeep Grand Cherokee has 5-lugs, while the Ford F-150 has 6-lugs.


So we come to an end. Before buying a new tire for your Jeep Grand Cherokee, the first thing to do is to check the compatibility of the tire by knowing the bolt pattern and diameter. 

There are also some other parameters like offset, center bore, torque, rim size etc. to check.

Read Also: Jeep Grand Cherokee Panoramic Sunroof Problems? (Solved)

Scroll to Top