How Do You Get Rust Off A Jeep Wrangler?

One of the most recognizable automobiles on the road is the Jeep Wrangler. It started as a lightweight, dependable, affordable choice. However, several owners of Jeeps have recently reported rusting issues. So how can you get rid of the 2017 Jeep Wrangler rust?

Get a replacement panel if the rust has destroyed a bodywork surface of your Jeep Wrangler. You can use fine-grit sandpaper to get rid of small traces of rust. To prevent rust from forming, you can add a protective layer.

Your Jeep’s frame may suffer significant damage from rust. So let’s have a thorough discussion of this topic!

When Should You Be Concerned About Rust On A Jeep Wrangler?

Minor rust on your Jeep Wrangler is not really a big deal. It would be best if you weren’t concerned about it. 

However, the second stage of rust starts to damage the structure of your car. The original metal deteriorates due to oxidation. After a while, the metal’s holes are filled, and the immediate region becomes considerably weaker.

Rust is a chemical reaction that is highly hazardous and ugly. It is, therefore, a problem when it appears in a significant amount. Fix it as soon as you can. You risk seriously damaging your Jeep if you don’t. Then it might be unlawful to operate your Jeep.

Rust On A Jeep Wrangler: Where To Look

Most of the components in the Jeep Wrangler are metal alloys. Rust can happen to metal alloys that contain iron. So, here are several places to check for rust:

Base Of The Front Fenders 

The base of the front fenders appears to be a particular area where rust is relatively widespread. There will probably be a lot of humidity contact in this area. As a result, it rusts easily.

Frame Rails 

Rust is also prevalent on the frame rails. The frame rails are fairly visible. This indicates that testing the rails for rust is easy.

Floor Pans 

The floor pans of the Wrangler are another component that could cause some rust issues. They are more prone than other interior parts to come into contact with dampness. 

Door Bottoms 

The rear corners and door bottoms are additional spots you need to watch out for. These areas often go into rusting.

What Causes Rust Formation on Jeep Wrangler Rust

Rust can develop in two ways. Either it damages the underside of your automobile, or the coating and protective layers on the chassis are harmed, exposing the metal.

The rusting problem is the result of oxidation. A Jeep Wrangler rusts due to an interaction between iron in the metal structure and oxygen from damp air.

Jeep Wranglers have a robust metal structure made up of many metal sections. To save weight and expense, manufacturers use a variety of composites and polymer panels. The Jeep Wrangler is more likely to develop rust because of this having a larger surface area.

How Do You Get Rust Off A Jeep Wrangler?

There are a few actions you can accomplish when rust eventually appears. Your actions will vary depending on your financial situation and the degree of rust development. 

However, it’s crucial to spot the rust as soon as possible before it starts to rot. The following are some options for rust removal:

1.Changing Panels

You might need to replace the entire chassis. You can purchase a brand-new bodywork panel if the rusting has destroyed a significant portion of it. 

Based on the board size you need to replace, this will cost you a few thousand dollars. Alternatively, you can apply a filler substance to restore the damage in the areas where you removed a bunch of rust.

2.Using Sandpaper

One of the simplest ways to handle a rusty Jeep Wrangler is to do this. You can eliminate a significant rust spot for less than $100. 

Use good sandpaper to remove the apparent rust and eliminate further minor rust. If this is too challenging, add an oxide reduction solution to remove any leftover rust. To stop future rust, ensure a protective, smooth finish.

How To Prevent Jeep Wrangler Rust?

You can use various techniques to stop your Jeep Wrangler from rusting. The most remarkable feature is that most of these techniques are simple and affordable. These are a few:

1. Cleaning Schedule 

Maintaining a clean automobile is one of the most straightforward strategies to prevent rust. Corrosive substances like bird droppings and gravel can start destroying your Jeep. 

Therefore, a short clean will remove these impurities and avoid corrosion on your Jeep.

2. Waxing 

It is one of the most economical ways to stop rust. Water runs off wax. This implies that rust won’t quickly impact your Jeep Wrangler. 

3. Parking In A Covered Area 

Parking in a closed garage shields your Wrangler from corrosion. In garages, there is far less moisture in the air.  

It also protects your Jeep from getting wet. These two details are sufficient to delay rust for a very long time.

4. Avoid Driving Through Water 

The urge to navigate across standing water on the road is constant. It’s unsafe because the puddles can rust your Jeep and seriously harm its mechanical components.

5. Don’t Use Automatic Car Washes

It’s inexpensive and swift to use an automatic car wash. However, it can harm the topcoat of your Jeep and result in rust-causing damage. Wash your automobile by hand instead.

Frequently Asked Questions (FAQs)

Rust on your Jeep Wrangler can still be a significant issue for you, and you might have further queries. Browse the FAQs below to gather a more in-depth explanation of your most common queries

How long does it take for rust to form on Jeep Wrangler damage?

Rust can cause rot if it is not found and cleaned immediately. However, there is no deadline for this. If the Jeep is constantly exposed to dampness, it will ultimately rust quickly and cause damage.

Is rust common on Jeep Wrangler?

Rust is a prevalent issue with Jeep Wranglers. It can happen to Jeeps even when they are well-maintained. Most rust problems begin on the inside and spread outward.

How much does a complete rust repair on a Jeep Wrangler cost?

Repairing rust is typically a labor-intensive process. Repairs for surface corrosion could run into hundreds of dollars. The greater range is roughly $650. However, complete rust removal may cost thousands of dollars, approximately $3,000.

Does insurance cover Jeep Wrangler rust repair?

All relevant U.S. guarantees are valid to a vehicle licensed and driven in a U.S. state. But only rust problems significant enough to puncture the Jeep’s body are covered by this insurance. The warranty does not cover surface corrosion.

Can rust cause permanent damage to your Jeep Wrangler?

Jeeps with paint peeled off and exposed to dampness or other types of moisture are more likely to rust. This can quickly become a problem with deep rust and result in severe, long-lasting damage.

Conclusion

The Jeep Wrangler was created to be nearly flawless. Apparently, rusting is the only drawback that people consistently mention. However, the reality is that rusting is not a significant issue. But if it is not addressed promptly, major harm could result.

We hope our overview of the 2017 Jeep Wrangler rust is clear. You may remove Jeep rust concerns by employing the techniques mentioned above. Don’t overlook it, and keep your Jeep safe and shiny!

Related Posts:

Scroll to Top