How To Lift A Jeep Wrangler? 6 Easy Steps

Lifting Jeep Wrangler is a common thing among Jeep drivers. Some do it for appeal, and some for off-road performance. But most of them cannot do it by themselves without proper guidance because they don’t know how to lift a jeep wrangler.

Moreover, lifting a Jeep Wrangler is quite a complex process. It requires various tools and an installation guide. You will have to install the lifting kit and decide how far you want to lift. Then use different wrenches to adjust your Jeep’s height.

In this article, we will provide information and instructions so you can install the Jeep Wrangler lifting kit by yourself and lift your Jeep. Read the following article and lift your Jeep without going to a mechanic.

Why Do People Lift Jeeps?

People lift their Jeeps because there are many benefits to lifting a Jeep Wrangler. When you raise your Jeep, it becomes more convenient for any kind of road. Here are some of the reasons why people lift their Jeeps.

1. Better Off-Road Performance

Off-road means uneven terrains, and people use jeeps on off-roads very often. A Jeep Wrangler’s stock height is suitable for off-road, but people lift their Jeep Wrangler for better off-road performance. That is one primary reason for Lifting Jeep Wrangler.

2. Customized Looks

Some people like their Jeep Wrangler to look different. Lifting your jeep gives a new look, and escalated height gives your Jeep Wrangler an aggressive look. Some Jeep drivers love that.

3. Fitting Larger Tires

Larger tires require more room beneath your Jeep Wrangler. Although the stock tires are great, some users want bigger tires to avoid road bumps. Lifted height gives Jeep more space to fit larger tires.

4. Improved Suspension

When lifting a Jeep Wrangler, you will need to install a lifting kit first. The lifting kit has a suspension set, which is somewhat better than stock suspension. And for this reason, people lift their Jeep Wrangler.

5. Saving Jeeps Underneath From Terrain Damage

Off-road tracks and road bumps can damage the skids and components below your Jeep Wrangler. When you lift your Jeep Wrangler, it saves your vehicle from those bumps. So, even when you are on rough tracks, there will be no scratch on your jeep.

Tools And Materials Required For Lifting Jeep Wrangler

You will need many different-sized wrenches and other tools for installing a lifting kit on your Jeep Wrangler. We will list the required materials below, so gather them before you start.

  • Trim Panel Removal Tool
  • Different Sized Wrenches: 14mm, 15mm, 16mm, 18mm
  • Different Sized Ratchets: ½” , ⅜” 
  • Sockets: 15mm, 16mm, 18mm, 21mm
  • Extension
  • Lift
  • Pole Jack or Jack Stands

How To Lift A Jeep Wrangler?

Lifting a Jeep Wrangler all by yourself can be challenging. We suggest you bring someone else for assistance, but consulting an expert is unnecessary. We will be providing every step so you can do it yourself. Let’s Start.

Step 01: Lift Your Jeep Wrangler And Remove the Wheels

Use jack stands to lift your Jeep Wrangler at a height where you can work comfortably. Use a wrench to remove the wheels of the front and back.

Step 02: Remove Front And Rear Brakes

After Removing the wheels, remove the brakes. Use an 18mm socket, then wrench to unscrew the brakes and drop down the axle. But remember to support both axles with Pole Jack before removing anything from its wheels, or some parts might fall.

The rear brakes have ABS, so you need to disconnect them. Also, remove the vent tubes.

Step 03: Remove and Disconnect The Shocks and Coil Spring

Use 16mm sockets to remove two bolts (per wheel) supporting the shocks. You will see the upper mounts first. So, start with removing those.

Once you have removed the stock shocks, start removing the coil springs. You will notice that your axles have come lower. Remove the lower shocks when it comes down.

Step 04: Install New Shocks And Springs

Before installing the new spring, remember that you will need more space to install each of them as they are more extensive. So, you need to bring down the axle a little bit more. Put the new springs in their place.

Now on the upper mount, install the new shocks and install the rest of the parts on top of it. After the shocks are in place, cover them with the dust boot for protection. Tighten the Shocks properly to prevent accidents.

Step 05: Re-install Brake Line

After everything is done, tighten every nut and bolt you have appropriately removed. There will be stock bolts and new bolts. Carefully tighten them. Then reconnect the brake lines with the main hardware and test them to see if they are working.

Remember to plug back the ABS that you disconnected before on the rear wheels. And re-install the vent tubes.

Step 06: Put The Wheels Back On

Lastly, you will need to put back the tires or wheels. You can put back the original one, or if you are looking for more lift-up, you can buy larger tires and install them. There you go, now your Jeep Wrangler is Lifted with new larger shocks.

Note: Lifting Kit for Jeep Wrangler costs $1000 at least, and depending on the quality, it can go up to $9000. This is only if you are installing them yourself. If you go to a mechanic, they will charge you extra for service.

Common Mistakes To Avoid When Lifting Jeep Wrangler

As installing a lifting kit on your Jeep Wrangler is not easy, common mistakes are expected from everyone trying to install it themselves. We will give some tips to make you aware of those mistakes and work carefully. We hope you find these tips helpful.

  • Do not use different shocks or springs on separate wheels. Use the same suspension system on every wheel.
  • Don’t be cheap; buy high-quality shocks, which can help in the long run.
  • While removing Bolts and Nuts, do not mix them up. Keep specific nuts in separate boxes. It will help put them back faster.
  • Don’t go for looks. Some lifting kits for Jeep Wrangler look shiny, but the functions are second-rate. Even if you want to look, go for look and performance both.
  • Remove and Tighten every bolt with proper tools (wrench, socket, ratchet). Wrong tools can damage the bolts.

Note: Buy a manual to determine which tool to use in which bolt. Service manuals for Jeep Wrangler are available online and offline. If the task is too complex for you and you don’t have confidence, bring it to a mechanic.


We have given all the necessary information you may need for installing a lifting kit on your Jeep Wrangler. But some additional questions also appear due to the complex process. We will answer some of those questions below.

How Much Does It Cost To Lift A New Jeep Wrangler

The lifting kit price for Jeep Wrangler Depends on the brand and the type of kit you want. On average, it can start from $1000 and reach up to $25000 for exclusive kits. The choice is yours, how much you want to spend.

How High Should You Lift Your Jeep Wrangler?

The ideal height we suggest is about 3 inches for better suspension and safety. However, if you want more height, some kits will do that for you, but they cost more.

How Long Does It Take To Put A Lift On A Jeep Wrangler?

It will take about 3-4 hours to install if someone has knowledge about Jeep Wrangler and knows how to change components. But for someone unprofessional, it can take much longer.

Will A Jeep Wrangler Dealership Install A Lift Kit?

Some Jeep dealerships install lift kits under one condition: it will void that vehicle’s warranty. Although they just lift around 1-3 inches only. If you want more lifting, then you have to find external mechanics.

Does Lifting A Jeep Wrangler Affect Gas Mileage?

In general, lifting slightly won’t have any effect on gas mileage. But if you are installing larger tires and heavier lifting kits, it can increase the overall weight of your Jeep Wrangler. Thereby, the engine will use more power to accelerate the Jeep, increasing fuel usage.


Jeep Wrangler is an excellent vehicle for off-roading and even for highways. The height of this vehicle is already good enough for every kind of road. 

But as you want to lift the Jeep more, we suggest doing it very carefully as it is an 80 thousand dollar vehicle, and slight mistakes can cost you a lot of money. We hope we have provided everything you need to know about how to lift a Jeep Wrangler. 

We have also given some tips; do follow those, so you don’t face any problems afterward. Hope this article was helpful and good luck with your needed lifting kit.

Related Posts:

Scroll to Top