Who would not love to take on an off-road adventure with their Jeep Wrangler? Knowing how to put your vehicle in a four-wheel drive can be essential for tackling challenging terrain and ensuring safety on the road.
To engage in a four-wheel drive, you have two options. If you’re stopped, simply pull the lever slowly but firmly to switch from 2WD high to 4WD high. Driving under 45 mph, you can also switch while on the move.
To execute each step accurately, we will walk you through the steps for shifting into 4H and 4L in your Jeep Wrangler. We will also provide tips for getting the most out of your 4WD system.
So buckle up and get ready to tackle those muddy trails and slippery roads with confidence.
How To Put Jeep Wrangler in 4-wheel Drive?: Step-by-Step Guideline
When choosing the right four-wheel drive setting for your Jeep Wrangler, consider the road conditions you’ll drive.
If you’re driving on loose or slippery terrain, 4H, or high gear, is the way to go. However, it’s best to use 4L or low gear if the roads are extremely slippery. But remember to stay under 25 mph while in 4L to avoid damage.
So keep an eye on your speed and choose the setting that best suits the road conditions for a smooth and safe ride. Here is a step-by-step guideline:
Shifting into 4H
Step 1: Bring your Jeep to a stop and keep your foot on the foot lever.
Step 2: Move the gear shift selector to Neutral.
Step 3: Move the four-wheel-drive selector to 4H from 2H.
Step 4: Shift the gear selector to Drive.
Shifting into 4L
Step 1 : Apply the brake and move the gear selector to Neutral
Step 2: Let the Jeep coast at low speed without pressing the accelerator.
Step 3: Without any delay in neutral, move the 4WD selector from 4H to 4L
Step 4: Shift the standard gear selector back to Drive.
4WD Lock VS Low: Which One to Use
When selecting the best four-wheel drive option for your Jeep, consider the driving conditions and your driving needs.
If you’re navigating muddy roads, the 4WD Lock setting can provide some extra traction to help keep you moving forward confidently.
If you’re planning on tackling off-road trails in a Trailhawk model, the 4WD Low setting can boost performance and help you conquer rough terrain.
- To activate the 4WD Lock, you can simply press the button located by the steering wheel or select your preferred terrain options.
- To engage 4WD Low, ensure your vehicle is stationary with the engine running, then press the button and wait for it to activate.
7 Tips to Optimize Jeep Wrangler’s 4WD system
Many Jeep wrangler owners fail to get the most out of their 4WD system due to a lack of understanding about using the different settings. Such as driving in 4L on dry, paved roads or not slowing down before disengaging 4WD. Here are 7 tips to help you:
- When driving on slippery or uneven surfaces, use 4H for added traction.
- Before switching to 4WD, take a moment to assess the road conditions to determine the appropriate setting.
- While driving, avoid changing between 2H and 4L to prevent damage to your vehicle.
- When in 4L, keep your speed at or below 25 mph to ensure safe operation.
- On slick, wet, and muddy roads, you should drive at speeds of 45-50 mph when using the 4H drive setting.
- However, be cautious when using 4H or 4L on dry, paved roads in arid areas, as these surfaces can be dangerous for 4WD operation. It can lead to damage or heat build-up.
- Before disengaging 4WD, slow down to ensure a smooth transition.
Frequently Asked Questions
We have answered some common questions our readers have regarding how to put the Jeep Wrangler in 4-wheel Drive. So keep reading to find out the answers.
How Can You Tell if Your Jeep Has 2WD?
Look at the gear shifters: If you don’t see a second, smaller, low-range, or 4H gear shifter, your Jeep is likely a 2WD. Check underneath the vehicle: If you don’t see a transfer case connected to the transmission, or if you only have a rear driveshaft, your Jeep is likely a 2WD.
Should you Use 4-Wheel Drive When Towing?
Using a 4-wheel drive when towing with your Jeep Wrangler is generally not recommended. The extra traction provided by 4WD can strain the drivetrain and potentially cause damage, especially if the heavy load is towed.
What do the 2H, 4H, and 4L Settings Mean in a Jeep?
Jeep four-wheel drive vehicles typically offer three different settings: 2H, 4H, and 4L. 2H is the default setting for normal, everyday driving on dry, flat, paved roads. 4H is a good choice for loose or slippery surfaces. Finally, 4L, or four-wheel drive low, is intended for very slippery conditions and should only be used at speeds of 25 mph or less.
What is the Safest Maximum Speed While Driving a Jeep Wrangler?
You can activate the 4H High-Range setting while the vehicle stops or moves. This shift can be made up to a maximum speed of 55 mph (88 km/h).
Now that you know how to put the Jeep Wrangler in a 4-wheel drive, you can take on any terrain confidently. Remember to determine whether you need 4H or 4L based on the road condition. And follow the steps to shift into 4H or 4L smoothly and safely.
Also, check the different drive modes to maintain your Jeep properly; these tips will help you make the most of your four-wheel drive experience.
Finally, always follow the manufacturer’s guidelines and seek professional help if you have any doubts or concerns about using 4WD