How to reset oil life on jeep grand Cherokee?

The dashboard light always creates headaches as they often indicate vehicle problems. But, some light can disappear with a simple reset. Among them, the Jeep Grand Cherokee oil light is one. It indicates your oil change interval. 

After the oil change, a simple reset can turn off the light. So, in the article, you will know two easy ways to reset the oil life on Jeep grand Cherokee.

Oil life meaning on jeep grand Cherokee

The remaining oil life indicator is a system in your jeep grand Cherokee that helps you track the mileage and time since you last changed the engine oil. So, it allows you to prevent any engine damage by delaying oil changing on time.

Oil life in jeep vehicles indicates by percentage. The percentage only refers to the quality of your vehicle engine oil. It does not indicate the level of oil. If the percentage decreases, you don’t need to add oil to the engine. When it shows 30%, it means the oil life quality is left at only 30%, and you should change the oil as soon as possible.

When to change oil on jeep grand Cherokee?

The actual oil change interval depends on your jeep grand Cherokee making year. It’s always a good idea to check the user manual or ask the dealer about the recommended oil change interval. 

However, if you use conventional oil, you should change engine oil after each 3,000 to 5,000 miles. Synthetic oil requires an interval between 7,500 and 10,000 miles.

When to reset oil life on jeep grand Cherokee?

If you recently changed the oil in your jeep grand Cherokee, you should reset “Oil life” to track the following oil change schedule. Sometimes, your jeep grand Cherokee engine oil change indicator system will pop up a message “Oil Change Required.” To remove the message, you can reset the oil life on your vehicle.

How to reset oil life on jeep grand Cherokee?

Following the below step-by-step procedure will allow you to reset the oil life on your Jeep Grand Cherokee easily:

Method 1:

Step 1: First, turn the ignition on the run position. You need to press the push button to start the ignition twice without depressing the brake pedal. Then, the screen is going to be lit up.

Step 2: After turning your grand Cherokee on the run position, you need to scroll down to find the oil life reset option. For this, you need to use the arrow keys on the left side of your vehicle steering wheel. 

Step 3: After reaching the oil life information, you need to hold the “OK” button to reset the oil life. It should be held until 100% is reached. You have successfully reset the oil life on your Jeep Grand Cherokee when it reaches 100%.

Method 2:

You can easily reset Jeep Grand Cherokees made before 2013 by following the steps below. Also, the method applies to most of the Jeep Grand Cherokee.

Step 1:  You need to turn off the ignition. In the same manner as method 1, press the push button twice without pressing the brake.

Step 2: press the accelerator pedal and release it three times. After, shut off the vehicle.

Step 3: Now, again, press the push button twice, and that time you should press the brake pedal. If you have done everything perfectly, you’ll notice the Oil life screen reaches 100%, which means you successfully do the reset procedure of your jeep grand Cherokee. 

Final words

The oil life reset is necessary on your jeep grand Cherokee to track the actual oil change interval. It helps to change the oil timely and keeps the engine safe from unwanted damage. However, after every oil change, you should reset the oil life. I hope the above guide will help you to know the easiest way to reset oil life on a jeep grand Cherokee.

Related Posts:

Scroll to Top