How To Turn Off Jeep Lights When Doors Are Open? [Fixed]

Your Jeep interior lights are supposed to turn on when you open your doors. Also, there’s some good reason for it. But, according to some Jeep owners, the interior lights become irritating whenever they open the doors, and they ask how to turn them off.

Sounds like you? No worries! You can turn off the dome lights when you open the Jeep doors by following a few steps. Besides, you’ll know how to control the interior lights completely. Keep reading this article to find out how.

How To Turn Off Jeep Lights When Doors Are Open?

You can’t deny the importance of the interior lights in your Jeep. You’ll be able to see things inside your car when you open the door with it. As well as improving your visibility inside the vehicle, this safety feature helps ensure everything is in order. 

But, sometimes, it becomes annoying when you open your Jeep doors, and the lights turn on. People outside will be able to see people inside the vehicle and other stuff. 

Clearly, the Jeep is one of the most customizable vehicles on the market, thanks to the manufacturers who made it possible.  If you want, you can get control over interior lights, and they will only turn on when you want. But, due to a lack of awareness about Jeep, most owners miss getting the most out of their vehicles. 

Accessing the dimmer switches (thumbwheel)Located left to the steering wheels.
Remove the door switch defeat fuseLocated inside the glovebox.

Read Also: Jeep Headlights Not Working: All Possible Causes With Solutions

Method 1: Accessing the Dimmer Switches (Thumbwheel)

This is one of the most convenient ways to deal with Jeeperior lights turning on when you open the doors.

Now, how do you turn off the lights using this method? For this, you need to locate the dimmer switch thumbwheel left of the steering wheel of your Jeep.

You can roll the dimmer switch up and down. Now, when you scroll the dimmer all the way up, the dome or interior lights in your Jeep Wrangler are supposed to turn on.

On the other hand, you can turn off the light if you scroll the dimmer all the way down. It is as simple as that. 

The dome lights are supposed to turn on when you open the door if the dimmer is in the middle position.

Now, if you want the dome lights not to come on when you open the door of your Jeep, you should turn the dimmer all the way down. This will make a clicking noise. 

But, unfortunately, if you turn off the dome light, you will notice the effect on the dash light at the same time.

To be more precise, the dash light’s brightness decreases when you slide the scroll dimmer down to turn off the dome light.

Read Also: Jeep JK Headlight Adjustment: How to Do it Properly?

Method 2: Remove the Door Switch Defeat Fuse

This method can also stop your Jeep’s lights from turning on when its doors are opened. The process of completing the task might take some time.

Additionally, removing the door switch defeat fuse will permanently disable the dome light from turning on when you open the door. 

You will find the door switch deactivation fuse inside the glovebox of your Jeep. If you own a Jeep Wrangler TJ or LJ, you can locate the glovebox on the passenger side of your vehicle behind the front seat. 

  • Step 1: Remove the glovebox.
  • Step 2: Locate the fuse diagram on the side of the glove box. 
  • Step 3: Determine the location of the door switch defeat fuse. 
  • Step 4: Take a fuse puller and pull the fuse at the bottom of the right corner.

Depending on your Jeep type, the glove box might be somewhere different. To make sure of the glovebox’s location, check your Jeep’s owner’s manual.

Read Also: How To Change a Jeep Wrangler Headlight Bulb

Final Words

The fact that the dome light in your Jeep turns on when you unlock the door is not a bad thing. As a result, it will be better if you accept this feature and get the most out of it by using it effectively.

If you are not convinced and are worried about your privacy, you can use either of the above mentioned methods. 

Scroll to Top