The Jeep Radio won’t turn off is a common problem in some models like jeep wrangler, cherokee, gladiator etc. Although this problem is not severe, it can create very annoying consequences for Jeep users.<\/p>\n
The faulty Power off button, bad radio, and the ignition switch are the main reasons the Jeep radio won’t turn off. Check these parts if there arises a problem.<\/strong><\/p>\n However, this issue has some manual but tricky solutions that will help you turn off your Jeep’s Radio. So, keep reading this article to learn what you need to do to get out of this trouble.<\/p>\n There could be numerous reasons behind a Jeep radio not turning off. So, let’s see the reasons that prevent a Jeep radio from turning off.<\/p>\n Read Also:<\/strong> Jeep Radio Not Working Problem: Try These Methods To Fix!<\/a><\/p>\n It usually happens when you have an old Jeep, or the radio has undergone technical damage. However, sometimes you may need to mess with your radio to make it normal again. Use these solutions to see if your Jeep’s radio turns off.<\/p>\n This problem often exists since the installation. It is simply a wiring problem that needs some rearrangement. Now, every car radio comes with a single ground and double power wires.<\/p>\n One of the two power wires always stays hot, whereas the other gets power during driving or when the ignition switch is in the ACC position. The ACC position allows you to use your radion even when the engine is turned off.<\/p>\n However, if you notice that the head unit’s primary power wire is linked to a power source, you will encounter a similar technical issue with your Jeep’s radio. It will not turn off even when you turn off the engine. To detect and avoid this problem, follow these steps:<\/p>\n Here we present the proper solution for the faulty ignition switch. Let’s follow the steps properly.<\/p>\n The Replacement cost for the Ignition switch can stand around 150$ to 250$. However, the price can get a little lower sometimes.<\/p>\n The ignition cylinder can sometimes prevent your radio from turning off. It happens when accessories are powered up even after turning the switch off. Due to this, turning the radio off becomes a pain.<\/p>\n When you turn the ignition switch off, your accessories should stop receiving power. However, if you have a faulty ignition cylinder, you can remove the key as usual, but the switch is not in the off position as it should be.<\/p>\n However, this is a minor problem and can be fixed by ensuring your ignition switch is in the off position after removing the key. Also, change the worn-out cylinder, and this will fix the problem.<\/p>\n Replacing the ignition cylinder can cost you around 250$ to 300$. However, it depends on your Jeep’s generation.<\/p>\nWhy Won’t The Jeep Radio Turn Off? <\/strong><\/h2>\n
\n
5 Easy Solutions For Jeep Radio Won’t Turn Off<\/strong><\/h2>\n
#1- Head Unit Wiring – Double Power Wires<\/strong><\/h3>\n
\n
#2- <\/strong>Faulty Ignition Switch<\/strong><\/h3>\n
\n
#3- <\/strong>Faulty Ignition Cylinder<\/strong><\/h3>\n