How to replace the side mirror on a Jeep Grand Cherokee?

Mirrors are required by law and are not merely a minor component of your Jeep Grand Cherokee. It enables us to keep an eye on the area around the car and evaluate the traffic situation.

Since they are made of delicate materials and remain outside of the vehicle, they are more prone to physical harm or falling off while you drive.

So how do you replace them?

Replacing the side mirror involves a few important steps to follow:

removing all the Phillips screws to remove the Door Panel, disconnecting the Mirror Harness, disconnecting the Mirror, and replacing it with the new one.

Anyway, If one of your Jeep Grand Cherokee’s side mirrors has broken, lost, or come off, we will describe a step-by-step guide and other relevant points. Keep reading

Tools Required To Replace Side Mirror On The Jeep Grand Cherokee

These are the necessary tools for replacing the side mirror on the Grand Cherokee. If you’re doing it for the first time and don’t already have access to these tools, you can easily buy them from an online or nearby retailer.

Phillips Head Screwdriver
8mm Socket
Trim Tool Set
Ratchet
Socket Extensions

The Process of replacing the side mirror we are going to describe should be similar to that of the following vehicles.

It is always a good idea to consult the service manual specifically for your car if you notice any discrepancies. It goes without saying that if you are unsure, let a professional handle the task.

Jeep Grand Cherokee 2005
Jeep Grand Cherokee 2006
Jeep Grand Cherokee 2007
Jeep Grand Cherokee 2008
Jeep Grand Cherokee 2009
Jeep Grand Cherokee 2010

How To Replace A Side Mirror On A Jeep Grand Cherokee?

Once you have the required tools, you can start the job. Let’s start with the step-by-step guide. Hopefully, by reading this, you will be able to replace the Jeep Grand Cherokee by yourself.

Step 1: Remove all the Phillips screws to remove the Door Panel

So take your trim tool. Just to the right of the mirror is a triangle-shaped board that can be easily removed with the trim tool. Now, remove the first Phillips screws from inside the island-shaped board or cover, which is situated beneath the triangle-shaped piece we previously removed.

Now remove the next Phillips screws inside the hole left upper part of the interior door handle. You might have to remove the plastic piece inside the hole.

The interior door handle contains the third Phillips screw. Once you have done this, you can successfully remove all the Phillips screws on the door panel, simply off the door panel.

Note: before removing the screws, be sure about the locations of the Philips screws on the door panel

Step 2: Door Panel Off

Once you have removed all the Phillips screws from the panel, take your trim tool and go to the left side of the panel and remove the door panel.

Step 3: Disconnect the Mirror Harness

Since the door panel is attached to the mirror harness, it has a push button. Simply push and pull. Now the door panel is completely off.

Step 4: Disconnect the Mirror

Three mounting bolts are holding the mirror. You need an 8 mm socket to remove all three bolts and disconnect the mirror. Now it’s time to install the new mirror.

Step 5: Install new Mirror

Three studs with mirrors should then be pushed through the hole after the plug of the mirror wire has been inserted. Install the three mounting nuts once the new mirror is perfectly aligned, or install the first nut before the others. Take your ratchet and tighten them up, but watch not to tighten them too much.

Step 6: Reinstall the Door Panel

Now put back the door panel. Make sure it is perfectly set all the way around. Put all the Philips screws. You are done, so make sure that it’s working properly.

How Much Does It Cost To Replace A Side Mirror On The Jeep Grand Cherokee?

Before we discuss costs, there are a few things to remember. In most cases,

Replacing the Jeep Grand Cherokee’s side mirror is preferable to repair it if it has sustained any physical damage.
The electric adjustment motor inside the housing has probably been damaged when the mirror has sustained any physical damage.

Since the replacement is the most likely scenario, either the entire mirror or just the glass portion must be replaced.

The motor that adjusts power mirrors may occasionally break down. Therefore, the cost of fixing varies according to the extent of the damage.

Depending on the circumstance, replacement costs typically range from at least $200 to a maximum of $500, excluding the cost of a mechanic because many of us fix the issue ourselves.

For the Jeep Grand Cherokee, you can search for manual and powered mirror assemblies as well as mirror glass. The estimated costs for the various parts are listed below.

Mirror Assembly manual $100 to &300
Mirror assembly Power $100 to $ 300
Screw and Torx head $10 to $50
Mirror Glass $50 to $100

Note: Do note that your car insurance will cover any damages to your mirror resulting from an accident. So, check this repair option before spending money out of your pocket.

Some Tips To Avoid Mistakes When Replacing Side Mirrors On Jeep Grand Cherokee

If you are a first-time DIYer, there is a chance to make some common mistakes. In order to help you, we’ve gathered some advice and mistakes you might encounter. Knowing them beforehand will lessen the likelihood of making a mistake you regret later.

Mistake 1: In most cases, you must remove the door panel except when replacing only the glass. Make sure to double-check each connector to ensure that it matches the old ones.
Mistake 2: If you have to replace the mirror, you most probably have to remove the door panel. Trying another way around is likely to increase the headache.
Mistake 3: After reinstalling the mirror, secure the wiring harness using a wire tie or fastener. And the wiring harness should come through the same way as it came out
Mistake 4: Make sure to connect the wire, or you might have to remove the door panel again.
Mistake 5: Nuts and bolts are what hold the mirror in place. When removing the last nut or fastener, make sure to support the mirror using your left hand because the mirror might fall off.
Mistake 6: Never forget to tighten the bolts also; since the base of the nut can be plastic, do not overtighten it
Mistake 7: When replacing only the glass because it is broken then, put some masking tape over the glass so it can not harm you

FAQs

We tried to cover necessary points while answering the questions. Still, you might have some relevant queries. Here are some frequently asked questions that you might want to know.

Can I replace the side mirror of the Jeep Grand Cherokee myself?

When it comes to replacing the side mirrors of your jeep on your own, the answer depends on whether the mirror is a manually adjustable mirror or a power-adjustable mirror.

Replacing a manually adjustable mirror is a straightforward way, which can be done on your own. However, replacing the heated mirror is a challenging process that may require professional assistance.

Is it safe to drive a Jeep Grand Cherokee with a broken side mirror?

As we have stated, the mirror of your jeep is necessary and required by law. More importantly, It ensures safety when you drive. This part of the Jeep Grand Cherokee remains outside the car and is more susceptible to physical damage. If so, make sure to replace it with the new one.

Can I replace just the glass in the mirror of the Jeep Grand Cherokee?

Sometimes only the glass of the jeep Grand Cherokee falls off. In such a case, you only have to replace the glass and do not have to replace the whole mirror assembly. Also, you do not have to remove the whole assembly to replace the glass.

How long does it take to replace the Jeep Grand Cherokee side mirror?

It depends on many factors. If you replace the manually adjustable mirror, it can take around 1 hour. Repair time increases when you remove the interior door panel to replace the mirror assembly.

Conclusion

There you have it all. Although replacing the side mirror on a Jeep Grand Cherokee may initially seem intimidating, it’s fairly simple if you have the right tools. The manual mirror is easy to replace, whereas the power mirror is a bit complex but pretty much doable.

Sometimes the mirror only needs to have its glass replaced, which is a simple DIY project. Also, replacing only the mirror glass is less expensive. Some precut glass mirrors might fit.

Hopefully, the blog was useful, and you were able to find a solution. You can broaden your search by watching video tutorials to make things clearer.